Epson WorkForce Enterprise WF-C21000 Series - Various Ways of Sending Faxes

Entering Fax Number Manually
Select Enter Directly, enter a fax number on the screen displayed, and then tap OK.
- To add a pause (pause for three seconds during dialing), enter a hyphen(-).
- If you have set an external access code in Line Type, enter "#" (hash) instead of the actual external access code at
the beginning of the fax number.
Note:
If you cannot manually enter a fax number, Direct Dialing Restrictions in Security Settings is set to On. Select fax
recipients from the contacts list or the sent fax history.
Selecting recipients from the contacts list
Select Contacts and select recipients you want to send.
e
following icon displays the contacts list.
To search for a recipient from the contacts list, select .
If the recipient you want to send to has not been registered in Contacts yet, select
to register it.
Selecting recipients from the sent fax history
Select
(Recent), and then select a recipient.
Selecting recipients from the list on the Recipient tab
Select a recipient registered as Assign to Frequent Use in Web
Cong
.
Note:
To delete recipients you entered, display the list of recipients by tapping on the eld of a fax number or the number of
recipients on the LCD screen, select the recipient from the list, and then select Remove.
Related Information
& “Making Contacts Available” on page 503
& “Destination Setting Items” on page 505
& “Recipient” on page 158
Various Ways of Sending Faxes
Sending a Fax after Checking the Scanned Image
You can preview the scanned image on the LCD screen before sending the fax. (Monochrome fax only)
1.
Place the originals.
“Placing Originals” on page 42
2.
Select Fax on the home screen.
Faxing (Fax-Capable Printers Only) > Sending Faxes Using the Printer > Various Ways of Sending Faxes
145