Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 405
& “Conguring a CA-signed Certicate” on page 563
& “Updating a Self-signed Certicate” on page 567
Importing the Encryption
Certicate
to the Email Destination
To use email encryption, you need to import an encryption certicate for each destination registered in the
contacts list.
is
section explains the procedure to import an encryption
certicate
to the email destination registered in the
contacts list.
1.
Access Web Cong and select the Scan/Copy or Fax tab > Contacts.
2.
Select the destination number for which you want to import the encryption certicate, and then click Edit.
3.
Import the encryption
certicate
to the destination for Encryption
Certicate
or Change encryption
certicate.
4.
Click Apply.
When an encryption certicate has been imported, a key icon is displayed on the contacts list.
Note:
You can check the
certicate
information for Encryption
certicate
status by selecting the destination number to which you
have imported the encryption certicate and clicking Edit.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 405
Solving Problems for Advanced Security
Restoring the Security Settings
When you establish a highly secure environment such as IPsec/IP Filtering or IEEE802.1X, you may not be able to
communicate with devices because of incorrect settings or trouble with the device or server. In this case, restore
the security settings in order to make settings for the device again or to allow you temporary use.
Disabling the Security Function Using the Control Panel
You can disable IPsec/IP Filtering or IEEE802.1X using the printer's control panel.
1.
Select Settings > General Settings > Network Settings.
2.
Select Advanced.
3.
Select from the following items that you want to disable.
❏ Disable IPsec/IP Filtering
Administrator Information
>
Advanced Security Settings
>
Solving Problems for Advanced Security
587