Epson WorkForce Enterprise WF-C21000 Series User Manual

Items Setting value and Description
Community Name (Read/Write) Enter 0 to 32 ASCII (0x20 to 0x7E) characters.
SNMPv3 Settings
Items Setting value and Description
Enable SNMPv3 SNMPv3 is enabled when the box is checked.
User Name Enter between 1 and 32 characters using 1 byte characters.
Authentication Settings
Algorithm Select an algorithm for an authentication for SNMPv3.
Password Enter the password for an authentication for SNMPv3.
Enter between 8 and 32 characters in ASCII (0x20-0x7E). If
you do not specify this, leave it blank.
Conrm Password Enter the password you congured for conrmation.
Encryption Settings
Algorithm Select an algorithm for an encryption for SNMPv3.
Password Enter the password for an encryption for SNMPv3.
Enter between 8 and 32 characters in ASCII (0x20-0x7E). If
you do not specify this, leave it blank.
Conrm Password Enter the password you congured for conrmation.
Context Name Enter within 32 characters or less in Unicode (UTF-8). If you
do not specify this, leave it blank. The number of characters
that can be entered varies depending on the language.
Related Information
& “Controlling protocols” on page 558
& “Protocols you can Enable or Disable” on page 558
Using a Digital
Certicate
About Digital Certication
❏ CA-signed Certicate
is
is a
certicate
signed by the CA
(Certicate
Authority.) You can obtain it to apply to the
Certicate
Authority. is certicate certies the existence of the printer is and used for SSL/TLS communication so that
you can ensure the safety of data communication.
When it is used for SSL/TLS communication, it is used as a server
certicate.
When it is set to IPsec/IP Filtering, IEEE802.1x communication, or S/MIME, it is used as a client
certicate.
Administrator Information > Advanced Security Settings > Using a Digital Certicate
562

Epson WorkForce Enterprise WF-C21000 Series Specifications

General

Brand	Epson
Model	WorkForce Enterprise WF-C21000 Series
Category	Printer
Language	English