Epson WorkForce Enterprise WF-C21000 Series - Menu Options for Printing from Memory Devices or Storage (When Staple Finisher Installed); Menu Options for Copying (When Staple Finisher Installed)

Related Information
& “Menu Options for Printer Features” on page 91
Menu Options for Printing from Memory Devices or Storage (When
Staple Finisher Installed)
Select the following on the printer's control panel.
❏ Select Memory Device, select the
le
type, and then select the Advanced tab.
❏ Select Storage, and then select the folder and
le.
Select Print Settings > Basic Settings tab.
Finishing (When Staple Finisher installed)
Eject Paper:
❏ Shi Sort:
Oset each set of copies.
Staple:
Select the staple location.
Punch:
Select the location for the punch holes.
Menu Options for Copying (When Staple Finisher Installed)
You can nd the menu on the printer's control panel below.
Copy > Basic Settings.
Finishing(When Staple Finisher installed)
Eject Paper:
❏ Shi Sort:
Oset each set of copies.
Staple:
Select the staple location.
Punch:
Select the location for the punch holes. Displayed when the punch unit is installed.
Using Optional Items > Staple Finisher > Menu Options for Copying (When Staple Finisher Installed)
349