Deleting the User Account
Delete the account registered to access control.
1.
Access Web
Cong
and select the Product Security tab > Access Control Settings > User Settings.
2.
Click Edit for the number you want to delete.
3.
Click Delete.
c
Important:
When clicking Delete, the user account will be deleted without a conrmation message. Take care when
deleting the account.
Return to the user setting list aer a specic length of time.
Related Information
& “Application for Conguring Printer Operations (Web Cong)” on page 405
Enabling Access Control
When enabling access control, only the registered user will be able to use the printer.
1.
Access Web
Cong
and select the Product Security tab > Access Control Settings > Basic.
2.
Select Enables Access Control.
If you select Allow printing and scanning without authentication information from a computer, you can
print or scan from the drivers that are not set with the authentication information. Set it when you want to
control the operation only from the printer's control panel and to permit printing and scanning from the
computers.
3.
Click OK.
e
completion message is displayed
aer
a certain period of time.
Conrm that the icons such as copy and scan are grayed out on the printer's control panel.
Related Information
& “Application for
Conguring
Printer Operations (Web
Cong
)” on page 405
Disabling the External Interface
You can disable the interface that is used to connect the device to the printer. Make the restriction settings to
restrict printing and scanning other than via network.
Note:
You can also make the restriction settings on the printer's control panel.
❏ Memory Device : Settings > General Settings > Printer Settings > Memory Device
❏ PC Connection via USB : Settings > General Settings > Printer Settings > PC Connection via USB
Administrator Information
>
Managing the Printer
>
Disabling the External Interface
549
To Next Page
Loading...
Need help?
General
