Epson WorkForce Enterprise WF-C21000 Series - Menu

Notify Send Result:
Sends a
notication aer
you send a fax.
Transmission Report:
Prints a transmission report aer you send the fax.
Print on Error prints a report only when an error occurs.
When Attach Fax image to report has been set in Settings > General Settings > Fax Settings
> Report Settings, faxes with errors are also printed with the report.
Backup:
Saves a backup of the sent fax that is scanned and saved to the printer's memory automatically.
e backup feature is available when:
❏ Sending a fax in monochrome
❏ Sending a fax using the Send Fax Later feature
❏ Sending a fax using the Batch Send feature
❏ Sending a fax using the Store Fax Data feature
File Name:
If you set this to On and send a fax, you can specify the name of the document to be saved in
the Stored Documents box and the Polling Send/Board box.
Related Information
& “Sending Dierent Size Documents Using ADF (ADF Continuous Scan)” on page 150
& “Sending Many Pages of a Monochrome Document (Direct Send)” on page 149
& “Sending a Fax Preferentially (Priority Send)” on page 149
& “Sending Faxes in Monochrome at
Specied
Time of the Day (Send Fax Later)” on page 149
Menu
Select the menus on the control panel as described below.
Fax > Menu
Transmission Log:
You can check the history of sent or received fax jobs.
Note that you can also check the history of sent or received fax jobs from Job/Status.
Fax Report:
Last Transmission:
Prints a report for the previous fax that was sent or received through polling.
Fax Log:
Prints a transmission report. You can set to print this report automatically using the following
menu.
Faxing (Fax-Capable Printers Only) > Menu Options for Faxing > Menu
161