c
Important:
Load the prepunched paper with the hole side toward you. Loading paper in an incorrect direction may cause paper
jam or smears inside of the printer.
❏ Paper cassette
Load pre-punched paper with the printable side facing down and the position of the holes at the front.
Select On as the Prepunched setting on the paper settings screen displayed on the control panel.
❏ Paper tray
Load pre-punched paper with the printable side facing up and the position of the holes at the front.
Select On as the Prepunched setting on the paper settings screen displayed on the control panel.
Note:
You can also display the paper settings screen by selecting
on the control panel.
Loading Paper
>
Loading Paper
>
Loading Pre-punched Paper
39
To Next Page
Loading...
