❏ Access to Language
❏ Access to
ick
Paper
❏ Access to Quiet Mode
❏ Access to Print Speed Priority
❏ Access to Detect Double Feed
❏ Protection of Personal Data
❏ Access to Copy Output Tray
❏ Accept Power O
Access Control:
Select On to restrict product features.
is
requires users to log into the product control panel
with their user name and password before they can use control panel features. In Accept
Unknown User Jobs, you can select whether or not to allow jobs that do not have the
necessary authentication information.
Admin Settings:
❏ Admin Password
Set, change, and clear an administrator password.
❏ Lock Setting
Select whether or not to lock the control panel using the password registered in Admin
Password.
Password Policy:
Select On to set password policy.
Password Encryption:
Select On to encrypt your password. You can also connect a USB device to backup the
encryption key. If you turn the power o while restart is in progress, data may be damaged and
the printer settings are restores to defaults. In that case, set password information again.
Audit Log:
Select On to record an audit log.
Program
Verication
on Start Up:
Select On to verify the printer's program when starting up.
Customer Research:
Select Approve to provide product usage information such as the number of prints to Seiko Epson
Corporation.
Restore Default Settings:
Reset the settings in the following menus to their defaults.
❏ Network Settings
❏ Copy Settings
❏ Scan Settings
Product Information
>
Settings Menu List
>
General Settings
435
To Next Page
Loading...
Need help?
General
