Epson WorkForce Enterprise WF-C21000 Series User Manual

Items Settings and Explanation
Kerberos Realm to be Used
If you select Kerberos Authentication for Authentication Method, select the
Kerberos realm that you want to use.
Administrator DN / User Name Enter the user name for the LDAP server in 128 characters or less in Unicode
(UTF-8). You cannot use control characters, such as 0x00-0x1F and 0X7F. This
setting is not used when Anonymous Authentication is selected as the
Authentication Method. If you do not specify this, leave it blank.
Password Enter the password for the LDAP server authentication in 128 characters or less in
Unicode (UTF-8). You cannot use control characters, such as 0x00-0x1F and 0X7F.
This setting is not used when Anonymous Authentication is selected as the
Authentication Method. If you do not specify this, leave it blank.
Kerberos Settings
If you select Kerberos Authentication for Authentication Method of LDAP Server > Basic, make the following
Kerberos settings from the Network tab > Kerberos Settings. You can register up to 10 settings for the Kerberos
settings.
Items Settings and Explanation
Realm (Domain) Enter the realm of the Kerberos authentication in 255 characters or less in ASCII
(0x20-0x7E). If you do not register this, leave it blank.
KDC Address Enter the address of the Kerberos authentication server. Enter 255 characters or
less in either IPv4, IPv6 or FQDN format. If you do not register this, leave it blank.
Port Number (Kerberos) Enter the Kerberos server port number between 1 and 65535.
Conguring the LDAP Server Search Settings
When you set up the search settings, you can use the email address and fax number registered to the LDAP server.
1.
Access Web
Cong
and select the Network tab > LDAP Server > Search Settings.
2.
Enter a value for each item.
3.
Click OK to display the setting result.
e settings you have selected are displayed.
LDAP Server Search Setting Items
Items Settings and Explanation
Search Base (Distinguished Name) If you want to search an arbitrary domain, specify the domain name of the LDAP
server. Enter between 0 and 128 characters in Unicode (UTF-8). If you do not
search for arbitrary attribute, leave this blank.
Example for the local server directory: dc=server,dc=local
Administrator Information > Settings to Use the Printer > Making Contacts Available
512

Epson WorkForce Enterprise WF-C21000 Series Specifications

General

Duplex Printing	Yes
Monthly Duty Cycle	Up to 400, 000 pages
Print Technology	PrecisionCore
Print Speed	Up to 100 ISO ppm (black/color)
Connectivity	USB, Ethernet, Wi-Fi, Wi-Fi Direct
Scanner Type	Color Flatbed / ADF
Recommended Monthly Page Volume	Up to 100, 000 pages
Supported Paper Sizes	Letter, Legal, A4
Ink Cartridge Configuration	4 individual ink cartridges (Black, Cyan, Magenta, Yellow)