System manual CECX / Connections and wiring
13.2.7 Transducer supply output and reference voltage output
Cable type
Twisted cable pair, with shielding.
See chapter "Analog input (current or voltage input)".
Plug type
Female connectors with a grid dimension of 5.08 mm as in the 24V power
supply.
13.2.8 Thermal input
Cable type
The following thermocouples can be connected to these inputs in both iso-
lated and in non-isolated configurations:
Type J (Fe-CuNi) according to IEC 548-1
Type K (NiCr-Ni) according to DIN 43710/1977 and IEC 548-1
Plug type
Female connectors with gold contacts and a grid dimension of 5.08 mm.
13.2.9 Incremental encoder input
Cable type
Shielded standard cable.
Plug type
9-pole D-SUB connector with completely conductive shell.
The cable shielding must be connected plane with the shield cover of the
plug. An additional connection of the shield and the ground (GND) is not
necessary.
CECX-II 13-10
To Next Page
Loading...
Need help?
General
