Festo CECX-X-C1 Series User Manual

CECX modular control system
Standard.lib Modules that are required by IEC61131-3 as
standard modules for an IEC programming
system.
Util.lib Modules for BCD conversion, bit/byte
functions, mathematical help functions,
controllers, signal generators, function
manipulators and analog value processing
AnalyzationNew.lib Modules for analyzing of terms
From 3S: − standard
libraries on CoDeSys
− Modbus libraries on
CoDeSys
3S_CanDrv.lib
3S_CANopenManager.lib
3S_CANopenMaster.lib
− CANopen libraries
SysLibCallback.lib 1)
SysLibCom.lib
SysLibDir.lib
SysLibDirect.lib
SysLibEvent.lib
SysLibFile.lib 2)
SysLibFileAsync.lib
SysLibFileStream.lib
SysLibGetAddress.lib
SysLibIecTask.lib
SysLibInitLibrary.lib
SysLibMem.lib
SysLibPLCConfig.lib
SysLibPlcCtrl.lib
SysLibProjectInfo.lib
SysLibRtc.lib 3)
SysLibSem.lib
SysLibShm.lib
SysLibSockets.lib 4)
SysLibSocketsAsync.lib 4)
SysLibStr.lib
SysLibTask.lib
SysLibTime.lib
SysTaskInfo.lib
BusDiag.lib
System libraries that offer access to special
hardware and software functions of a CECx
(e.g. access to real-time clock, file system,
communication interface, etc.).
Diagnosis for CAN bus systems and
PROFIBUS DP systems
From 3S − target system
specific libraries that are
adjusted specially to a
CECx system
Ethernet.lib Modules for network configuration
EventData.lib Modules for evaluating interruptible inputs
IncEnc.lib Modules for latch functions of incremental
encoders
PLCService.lib Modules for control services (e.g. operating
hours counter, version information, etc.)
SysLibComEx.lib Modules for switching the mode between
RS485/422
KSys.lib
TestFunctions.lib
Internal modules
From KEBA: − target
system specific library
CECX-I 11

Festo CECX-X-C1 Series Specifications

General

Brand	Festo
Model	CECX-X-C1 Series
Category	Controller
Language	English