System manual CECX / Digital input/output module CECX-D-6E8A-PN-2
CECX-II 18-4
18.3.2 Accessories
18.3.2.1 Connector strip
Input-/output signals: Standard male connectors with grid dimension
5.08 mm
The following female connectors are required:
1 block with 8 connections
1 block with 6 connections
1 block with 2 connections
Socket board CECX-D-6E8A-PN-2 Order no. Weidmüller
8-pole 1 BLZF 5.08/8 SN SW - 170775
6-pole 1 BLZF 5.08/6 SN SW - 170773
2-pole 1 BLZF 5.08/2 SN SW - 170769
Information
Larger terminal blocks may be used to group multiple signals. The current
carrying capacity of the terminal block is thus, however, reduced (according
to derating curve of the terminal block manufacturer.)
The technical data for the terminals are contained in the technical data
sheet of the manufacturer of the female connectors.
To Next Page
Loading...
Need help?
General
