Festo CECX-X-C1 Series User Manual

System manual CECX / Analog input/output module CECX-A-4E4A-V
CECX-II 21-16
Analog outputs
Number of outputs: 4
Type: Voltage output
Resolution: 12 Bit
Signal range:
± 10 V
Galvanic isolation: No
Conversion cycle: 1 ms
Value of the lowest-value Bit (LSB): 5.32 mV
Monotonicity: Yes
Load resistance:
≥ 1000 Ω
Highest capacitive load:
≤ 10 nF
Differential non-linearity:
≤ ± 1 LSB
Settling time at change over the full
range (at ohmic load):
≤ 50 s μs
Typ. temp. coefficient analog output
error:
± 20 ppm of FSV* / °C
Max. temp. coefficient analog output
error:
± 30 ppm of FSV* / °C
Biggest error at 77.00° F:
± 0.15 % of FSV*
*FSV … Scale end value
Interfaces
System bus-interface: Parallel bus interfaces, plug-in on side
Dimensions:
Footprint:
Module height: 120 mm
Mounting depth: 100 mm
Front panel width: 22.5 mm
Module width:
(incl. K-Bus plug)
32.5 mm
Weight: 135 g

Festo CECX-X-C1 Series Specifications

General

Brand	Festo
Model	CECX-X-C1 Series
Category	Controller
Language	English