System manual CECX / SSI Interface module CECX-C-2G1
CECX-II 29-2
CAUTION
• CAUTION used without the safety alert symbol indicates a potentially
hazardous situation which, if not avoided, may result in damage to
property.
• This symbol reminds you of the possible consequences of touching
electrostatically sensitive components.
Information
on use of equipment and useful practical tips are identified by the “Informa-
tion” symbol. Notes do not contain any information that draws attention to
potentially dangerous or harmful functions.
29.2.2 General safety notes
z The device is defined as "open type equipment" and must therefore be
installed in a control cabinet.
z The system manual is additionally required for programming of the
module.
CAUTION!
Improper use of the assembly or the control system leads to irreparable
damage!
• Turn off the power supply before inserting or removing the module.
Otherwise, the module can be destroyed or undefined signal states can
lead to damage of the control system.
To Next Page
Loading...
Need help?
General
