Festo CECX-X-C1 Series User Manual

System manual CECX / Safety notes
!
ATTENTION!
Fire danger for component failure!
 Ensure adequate fuse protection of the 24 V DC power supply of the
CECX modular control system in the end usage!
The max. permitted fuse is 10A!
 The 24V power supply for the equipment must be safeguarded by safe
separation of the extra low voltage circuits from any hazardous voltage
circuits.
CAUTION
Improper handling will destroy the module or the control system!
 Turn off the power supply before inserting or removing the module.
Otherwise, the module can be destroyed or undefined signal states can
lead to damage of the control system.
 When removed from the rack, the modules used in the system are sen-
sitive to electrostatic discharge. Before handling modules, touch a
grounded metal object in order to discharge any static electricity from
your body.
2.2.1 Personnel safety
!
WARNING!
 Unqualified interventions in the control may cause abnormal behavior
of the machine/plant or personal injury or damage to the equipment.
Only especially qualified staff may perform interventions in the control
system.
Protective earthing
The protective earthing is specified for all equipment with conductive hous-
ing if high voltage can occur inside the equipment. Relevant official direc-
tives (e.g. ÖVE, VDE) control the version of the protective earthing in most
countries.
If a fault occurs in the equipment, a short circuit to earth will be caused and
the power supply will be interrupted via the series connected protection de-
vice (fuse, fault-current circuit breaker,...).
CECX-II 2-3

Festo CECX-X-C1 Series Specifications

General

Brand	Festo
Model	CECX-X-C1 Series
Category	Controller
Language	English