FlexRadio Systems SDR-1000 User Manual

O P E R A T I N G F O R M S C H A P T E R 9
 KEYS ACTIVE. Clicking this button will enable you to use the keyboard to enter characters at the
end of the unsent area. As soon as a character is typed it will be sent and then moved to the unsent
area. If you type faster than the code is being sent, it will be buffered in the bottom area. cyan
indicator shows that Keys Active is enabled.
o The Backspace key will work in the unsent area.
o Other editing keys like cut and paste are not implemented.
o Pressing Alt 1 to Alt 9 or right clicking on the message number button will cause the numbered
message memory to be copied into the unsent area just as if you had typed it.
o The ditto character is ignored in the keyboard mode.
 Pause (F1): Clicking this button or the pressing the F1 key will cause keyboard buffer sending to
pause.
 Clear (F2): Clicking this button or pressing the F2 key will clear the keyboard area and stop it
sending. Of course, the Stop (Esc) button or the Esc key will do the same.
 PTT Delay: This control allows you to set the time delay between switching the radio to transmit
and the first key closure.
[The rest of this page has been left blank intentionally]
127 FlexRadio Systems

FlexRadio Systems SDR-1000 Specifications

General

Brand	FlexRadio Systems
Model	SDR-1000
Category	Radio
Language	English