H A R D W A R E C O N F I G U R A T I O N C H A P T E R 3
Software monitoring: Forward/Reverse Power and SWR
SWR protection: automatic power reduction for SWR > 2:1
DC power requirements: 13.8VDC @ 25A nominal for full output
Internal fuse: 25A automotive mini fuse with reverse polarity protection
Output: BNC 50 Ohm on rear panel
Cooling: 80x80x15mm, 23dB-A fan provided
Internal expansion connections: ATU RF In/Out and control
Automatic Antenna Tuning Unit
The SDR-ATU is a fully integrated automatic antenna-tuning unit across the entire HF range. It will tune
dipoles, verticals, Yagis or virtually any coax-fed antenna. It will match a wide range of antennas and
impedances. Features include:
Microprocessor controlled, switched L tuning network
Automatically matches antennas from 6-800 ohms impedance, or a 10:1 SWR, 3:1 on 6m
Tunes from memory in less than one half second. A full tune will take from 1-6 seconds.
200 memories for almost instant return of previously tuned frequencies.
Continuous coverage from 1.8 to 54 MHz
Power range 0.1 to 125 Watts, 50 Watts on 6m
Griffin PowerMate
TM
VFO Tuning Knob
The attractive GCN-SLV Griffin Technology PowerMate control knob connects to a USB port to provide
variable-rate VFO tuning for the SDR-1000. A simple click of the knob changes the tuning rate to any of
four user configured tuning rates. It can even be programmed to set the volume by a press, hold, and turn of
the knob. Made of high-quality machined aluminum, PowerMate feels like a solid volume knob pulled right
off the front of a world-class stereo. Its heavy weight and tactile feel are a welcome departure from typical
plastic USB peripherals.
Contour Designs Shuttle Pro V.2
The ShuttlePro V.2’s sleek innovative design, pre-configured for many of today's popular applications,
advanced programmability, and ease of use is in short, the perfect marriage of form and function.
6 FlexRadio Systems
To Next Page
Loading...
Need help?
General
