10
Operation
How to use the SDR-1000 in a typical operating environment.
This chapter is intended to provide the user with a clear understanding of how the SDR-1000 should be
used when performing basic operations such as Powering Up or making a voice transmission. We chose to
use this section in this way in lieu of listing all of the features of the radio since the feature list would
essentially repeat the information given in the three preceding chapters. Please refer to those chapters for
complete feature descriptions and how to use the controls.
Note 1: For consistency we will use the same control identifiers as in the
preceding Front Console chapter and for clarity we will leave out any
identifiers of controls not referenced in the relevant section
Note: The procedures outlined in this chapter assume that the calibration
routines outlined in the Calibration section of the Setup Form chapter
above have already been carried out.
[The rest of this page has been left blank intentionally]
129 ď›™FlexRadio Systems
Chapter
10
To Next Page
Loading...
Need help?
General
