TX1310 M1
Upgrade and Maintenance Manual 133
10 Main memory
Safety notes
V CAUTION!
●
Do not install unsupported third party memory modules. For further
information on supported memory modules, refer to section "Basic
information" on page 134. Doing so may cause electric shock, a fire,
or failures.
●
Memory modules remain hot after shutdown. Wait for components to
cool down before installing or removing memory modules to prevent
burns.
●
Do not insert and remove memory modules repeatedly. Doing so may
cause failures.
●
Pressing out the securing clips on the memory module connector will
eject the installed memory module. To prevent damage and injuries
eject memory modules carefully without applying excessive force.
●
For further safety information, please refer to chapter "Important
information" on page 27.
To Next Page
Loading...
