TX1310 M1
Upgrade and Maintenance Manual 137
Main memory
Figure 82: Installing memory modules (B)
Ê Align the notch on the bottom of the module with the crossbar in the
connector (see circle).
Figure 83: Installing memory modules (C)
Ê Press down on the memory module until the securing clips snap into the
cutouts at each end of the module.
10.2.3 Concluding steps
Ê "Installing the side cover" on page 53
Ê "Connecting the server to the mains" on page 54
Ê If applicable, "Updating or recovering the system board BIOS" on page 68
Ê "Switching on the server" on page 55
Ê "Enabling BitLocker functionality" on page 74
To Next Page
Loading...
