TX1310 M1
Upgrade and Maintenance Manual 91
Hard disk drives
Figure 40: Connecting SATA cables to HDD3 and HDD4
Ê Connect the corresponding SATA cable to the hard disk drive:
1 SATA cable connected to SATA3 to HDD3
2 SATA cable connected to SATA4 to HDD4
For further cabling information, please refer to section "Cables" on
page 217.
7.2.4 Concluding steps
Ê "Installing the side cover" on page 53
Ê "Connecting the server to the mains" on page 54
Ê "Switching on the server" on page 55
Ê "Performing a RAID array rebuild" on page 75
/
0
To Next Page
Loading...
Need help?
General