TX1310 M1
Upgrade and Maintenance Manual 203
System board and components
Figure 152: Removing the TPM spacer
Ê Using a flat nose pliers, press together the hooks on the TPM spacer and
remove it from the system board.
I If the TPM is to be replaced, the TPM spacer may remain on the
system board.
Ê Install the system board as described in section "Installing the new system
board" on page 212.
14.3.2.3 Concluding steps
Ê "Installing the HDD cage" on page 59
Ê "Installing the front cover" on page 48
Ê Install all removed accessible drives as described in section "Installing
accessible drives" on page 49.
Ê "Installing the side cover" on page 53
Ê "Connecting the server to the mains" on page 54
Ê "Switching on the server" on page 55
To Next Page
Loading...
