172 Upgrade and Maintenance Manual
TX1310 M1
Accessible drives
12.2.5.2 Installing the backup drive
Ê Install the backup drive as described in section "Installing the backup drive"
on page 51.
Figure 120: Connecting USB 3.0 cable to system board
Ê Connect the USB 3.0 cable to onboard USB3.0 connector "USB 1" on the
system board.
12.2.6 Concluding steps
Ê "Installing the side cover" on page 53
Ê "Connecting the server to the mains" on page 54
Ê "Switching on the server" on page 55
Ê "Verifying and configuring the backup software solution" on page 69
Ê "Enabling BitLocker functionality" on page 74
To Next Page
Loading...
