TX1310 M1
Upgrade and Maintenance Manual 205
System board and components
14.3.3.2 Removing the defective TPM
Ê Remove the TPM as described in section "Removing the TPM" on page 200.
Ê Leave the TPM spacer on the system board when removing the defective
TPM.
14.3.3.3 Installing the new TPM
I The TPM spacer is already present on the system board.
Ê Install the new TPM as described in section "Installing the TPM" on
page 196.
14.3.3.4 Concluding steps
Ê "Installing the HDD cage" on page 59
Ê "Installing the front cover" on page 48
Ê Install all removed accessible drives as described in section "Installing
accessible drives" on page 49.
Ê "Installing the side cover" on page 53
Ê "Connecting the server to the mains" on page 54
Ê "Switching on the server" on page 55
Ê "Enabling BitLocker functionality" on page 74
To Next Page
Loading...
