192 Upgrade and Maintenance Manual
TX1310 M1
Front panel and front USB
Figure 144: Installing the front USB module
Ê Place the new front USB module in the direction shown and secure it with
four screws (see circles).
Ê Connect the front USB cable to the front USB connector on the system
board.
13.2.4 Concluding steps
Ê "Installing the HDD cage" on page 59
Ê "Installing the front cover" on page 48
Ê Install all removed accessible drives as described in section "Installing
accessible drives" on page 49.
Ê "Installing the side cover" on page 53
Ê "Connecting the server to the mains" on page 54
Ê "Switching on the server" on page 55
Ê "Enabling BitLocker functionality" on page 74
To Next Page
Loading...
