Chapter 11: Quality Assurance Process and Maintenance
Definium 5000 X-Ray System 5197809-1EN Rev. 4 (13 February 2008) 11-6
Operator Manual © 2008 General Electric Company. All rights reserved.
Figure 11-9 Image Quality screen
2. Select Quality Control Tests from the left side of the screen (Figure 11-10).
Figure 11-10 QAP selection from left side of screen
The Quality Assurance Program screen appears.
Figure 11-11 Quality Assurance Program screen
3. Press [QAP].
The Vertical Bar Calibration screen appears.
FOR TRAINING PURPOSES ONLY!
NOTE: Once downloaded, this document is UNCONTROLLED, and therefore may not be the latest revision. Always confirm revision status against a validated source (ie CDL).
To Next Page
Loading...
