GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3 LOGIQ™ 9 PROPRIETARY MANUAL
Chapter 4 Functional Checks 4-1
Chapter 4
Functional Checks
Section 4-1
Overview
4-1-1 Purpose of Chapter 4
This chapter provides procedures for quickly checking major functions of the LOGIQ™ 9 scanner
diagnostics by using the built-in service software, and power supply adjustments.
Section 4-2
Required Equipment
• An empty (blank) MO Disk.
• At least one transducer. See “Probes” on page 1-41. for an overview.
(normally you should check all the transducers used on the system)
Table 4-1 Chapter 4 Contents
Section Description Page Number
4-1
Overview
4-1
4-2
Required Equipment
4-1
4-3
General Procedure
4-2
4-4
Software Configuration Checks
4-20
4-5
Peripheral Checks
4-21
4-6
Mechanical Function Checks
4-22
4-7
Site Log
4-24
NOTICE
Most of the information pertaining to this Functional Checks chapter is found in the LOGIQ™ 9
Quick Guide (Direction number 2309820-100).
To Next Page
Loading...
