GE LOGIQ 9 - Back-End Processor Installation Procedure

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3 LOGIQ™ 9 PROPRIETARY MANUAL
8-16 Section 8-3 - Back End Processor Replacement Procedure
8-3-6 Back-End Processor Installation Procedure
Table 8-4 BEP1 (P3) Back-End Processor Cable Identification
Number Slot Cable Function
C1
C2
C3
C4
C5
C6
C7
C8
Mouse - Not used.
Keyboard - Not used.
USB #1
USB #2
Parallel Port - Used for Options Dongle
COM1
COM2
Joystick - Not used
C18 PCI Slot 1
Flat Panel Video
AGP Slot
Connect to PCVIC D3
C9
C10
C11
PCI Slot 2
Audio Out to Internal I/O B4 (Green)
Audio In to Internal I/O B4 (Blue)
Microphone to Internal I/O B4 (Pink)
C12 I/O Slot
Power Supply UPS control - Connect to Internal I/O B9
C14 AGP Slot
Not used
PCI Slot 3
Optional 3D Card
C16 PCI Slot 4
PC2IP - Connect to Front End card rack SCB board
C17 PCI Slot 5
Network Interface Card - Connect to Internal I/O B3
D1
D2
D3
D4
D5
PC2IO
PC2IO
PCVIC
PCVIC
PCVIC
Signals to I/O boards to Internal I/O B5
Power to I/O boards to Internal I/O B6
SVGA in from Back-end Processor video board
SVGA out to top console
RGB out to color printer
M AC Power
Connect to AC control module