GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3 LOGIQ™ 9 PROPRIETARY MANUAL
8-182 Section 8-50 - Wireless Voice Scan Option
8-50-3 Receiver Setup
Remove Side Covers, Filter Cover and Top Cover if necessary.
You will see the receiver and its associated cables nested in a tray with foam.
1.) Lift off the top foam so you can turn the receiver and look at its control panel.
2.) Install the Service Dongle and turn on the LOGIQ™ 9 .
Figure 8-195 Voice Scan Receiver Tray Assembly
To Next Page
Loading...
Need help?
General
