GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3 LOGIQ™ 9 PROPRIETARY MANUAL
3-4 Section 3-3 - Receiving and Unpacking the Equipment
Section 3-3
Receiving and Unpacking the Equipment
CAUTION
Have two people available to unpack the LOGIQ™ 9. Attempts to move the unit considerable
distances or on an incline by one person could result in injury or damage or both.
Table 3-4 Unpacking Procedure
Step Task
1.
Open the four hinges on each door
2.
Remove the doors at both ends of the box
3.
Place the front door against the rear edge of the pallet. The front door can be used as a ramp.
4. Carefully remove the accessory box, and any other items, including the wooden shelf above the scanner’s keyboard and all the filling
material, from the wooden box.
5.
Press once on the swivel lock to release the brake.
Caution: Two people are needed in the next step due to the weight of the equipment.
6. Carefully move the scanner out of the wooden box, down the ramp.
7. Remove the clear plastic (wrapped around the scanner) from the unit.
Be sure to place the
ramp (front door) as
illustrated here.
Front Door
used as ramp.
Swivel Lock
To Next Page
Loading...
Need help?
General
