GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3 LOGIQ™ 9 PROPRIETARY MANUAL
Chapter 7 Diagnostics/Troubleshooting 7-9
(Customer has to enable "Disruptive Mode")
If the customer has not enabled "Disruptive Mode", a warning is displayed.
2.) After "Disruptive Mode" is enabled by the customer, "Virtual Console Observation" can be activated
by selecting the VCO Tool under Scanner Utilities and then press the "Start" button.
Figure 7-7 Disruptive Mode
Figure 7-8 Virtual Console Observation “Warning”
To Next Page
Loading...
