GE LOGIQ 9 User Manual

GE MEDICAL SYSTEMS PROPRIETARY TO GE
D
IRECTION 2294854-100, REVISION 3 LOGIQ™ 9 PROPRIETARY MANUAL
Chapter 9 Renewal Parts 9-17
1
SCB1 can be used on this model number also.
2
EBM can be used on this model replacing the BMP4 and EQ4. However EBM requires SCB1.1 at a minimum.
3
RF Amp1.2 can be used in this model number also.
4
FEPS2 and FEPS2.1 can be used on this model number. However, must also use FEP Card Rack Cover Kit 2374426.
5
FEPS2.1 can also be used on these model numbers
409A
FEPS2
2273641-3
X
4
X
Second Generation FEPS
Cross to a FEPS2.1 if stock is depleted
May require Front End Card Rack cover kit 2374426
if replacing a 2260203 FEPS
11
409C
FEPS2.1
2273641-4
X
4
X
5
X X Second Generation with Standby Capabilities 1 1
409B
FEPS3
2376843 X
Analog Voltages are +/- 6V and 13V compared to
+/-6v and 12V found in FEPS, FEPS2 and FEPS2.1
Must be used in systems with TD5.X and RF Amp2
(DO NOT use in R2.X.X systems or
Systems upgraded to BT’03)
11
410
FEP AC Line
Filter
2315960 X X X X X Attached to side of FEP Card Rack 1 1
412
FEP Card Cage
Front Cover Kit
2374426 X X
Required if upgrading from FEPS to FEPS2/FEP2.1
Has additional shielding around Top Plane area and
Power Supply areas.
Labels included in kit to match FEP configuration
1 1
Table 9-12 Front End Processor Assembly
Applications Software R2.X.X R3.X.X
LOGIQ 9
Model Number
Item Part Name
Part
Number
Description Qty FRU
2188900-X
(BT’01)
2351100-X
(BT’02)
2375600-X
(BT’03)
2188900-X (BT’03 upgrade) 2351100-X (BT’03 upgrade)

GE LOGIQ 9 Specifications

General

Brand	GE
Model	LOGIQ 9
Category	Medical Equipment
Language	English