209
8 Enter new Tint values in the Top and Base boxes.
9 To edit the fill, select the color position arrow (it will turn black) and change the
location or tint.
10 If using Linear Fill, enter the angle in the Linear Angle group box. If using Radial Fill,
enter the X and Y% offsets in the Radial Center Offset group box. For either fill, click
inside the sample fill box and visually adjust the position of the fill. The sample fill box
displays a preview of the fill.
11 Click OK to return to the Composer work surface.
Tip: To remove a color, double-click that color arrow in the position slider or drag the arrow off
the end of the slider.
Editing fill attributes
Smart edit any filled object by double-clicking with the Color Selection tool. Several of the filled
attributes can be changed without affecting the design. These are Fill types, Halftone, Linear
Angle, Color Type, Color, Position and Tint.
To edit fill attributes
1 Double-click a filled object to open the Assign Colors dialog box.
2 Change one or more of the attributes.
3 Click OK.
To Next Page
Loading...
Need help?
General
