Gerber OMEGA CP - Checking and Selecting Images and Image Templates; Checking and Selecting Overlaps, Overprints, or Primer; Checking and Selecting Small Text by Color Type; Checking and Selecting Open Shapes

247
♦ Click Select > Cut/Print to select objects that have both fills or strokes and cutlines. At
least one object in the job must have a print attribute and a cutline assigned for this
command to be available.
Checking and selecting images and image templates
Use Select > Images before printing to verify if an image is a template or a non-template (filled
for printing). Templates will not print. To see images in a design, the Templates and Images
options must be turned on in Tools > Options > View. Images or templates that are hidden or
locked cannot be selected using the Select menu commands.
♦ Click Select > Images > Templates to select only image Templates.
♦ Click Select > Images > Non-templates to select images filled for printing.
♦ Click Select > Images > All to select Templates and Non-templates.
Checking and selecting overlaps, overprints, or primer
In the Select menu, the options for overlaps, overprints, and primer are only available if the job
has overlaps, overprints, or primers assigned to objects. Objects that are hidden or locked
cannot be selected using the Select menu commands. These commands are only available if
there is at least one object with that attribute in the job.
♦ Click Select > Overlaps > Fills, Strokes, or Both to select objects with these overlap
attributes.
♦ Click Select > Overprints > Fills, Strokes, or Both to select objects with these
overprint attributes.
♦ Click Select > Primer > Fills, Strokes, or Both to select objects with these primer
attributes.
Checking and selecting Small Text by color type
Small Text that has a fill assigned to it can be selected by the color type in the Select menu.
Small Text that is hidden or locked cannot be selected by the Select menu commands.
♦ Click Select > Small Text > Spot, Process, Clear, or All to select Small Text that has
been filled.
Checking and selecting open shapes
Clicking the Open Shapes in the Select menu selects any open shapes in your job. Open shapes
that are hidden or locked cannot be selected by the Select > Open Shapes command.
♦ Click Select > Open Shapes to select any open shapes in the job.
Checking and selecting Locked Objects
Use the command Select > Locked Objects to select any object that has been locked with the
Layout > Lock Object command or by clicking the lock icon for the object in the Layer Manager