Gilera GP 800 i.e. - Page 11

OIL FILTER
Specification Desc./Quantity
Type Paper with pressure relief and anti-drain back by-
pass valves
OIL MINIMUM PRESSURE INDICATOR LIGHT SWITCH
Specification Desc./Quantity
Calibration 0.3 - 0.6 bar
HEAD LUBRICATION CONTROL JET
Specification Desc./Quantity
Diameter 1 ± 0.05 mm *
* Tightening torque 5÷7 N·m
PISTON COOLING NOZZLE
Specification Desc./Quantity
Diameter Ø 1 ± 0.05 mm
CRANKCASE VENTILATION CHECK
Specification Desc./Quantity
Device metal reed valve and decantation chamber
TECHNICAL SPECIFICATIONS
Specification Desc./Quantity
Cooling system capacity 2.4 l
Prescribed fluid AGIP PERMANENT SPEZIAL
Sealing pressure Cap calibrated at 0.9 bar
THERMOSTAT
Specification Desc./Quantity
Type Wax-type, with deviator
Starts opening 85±2°C
ELECTRIC VENTILATION
Specification Desc./Quantity
Type With piston
Electric ventilation starts at 105°C
Electric ventilation stops at 100°C
WATER PUMP
Specification Desc./Quantity
Type Centrifugal
Control Gear on oil delivery pump
RADIATOR
Specification Desc./Quantity
Type Aluminium, with horizontal circulation
GP 800 i.e. Characteristics
CHAR - 5