Gilera GP 800 i.e. - Aesthetic Inspection; Pre-Delivery; Tightening Torques Inspection; Screws Fixing Half-Handlebars - Supporting Plate

Carry out the listed tests before delivering the vehicle.
Warning- be very careful when handling fuel.
Aesthetic inspection
Appearance checks:
- Paintwork
- Fitting of plastics
- Scratches
- Dirt
Tightening torques inspection
- Visually check that there is a yellow mark on the following clamps:
HANDLEBAR
•
Screws fixing half-handlebars - supporting plate
•
Screws fixing brake pump to handlebar
•
Brake pipes / brake pump couplings
•
Brake pipes / front brake pump couplings
FRONT SUSPENSION
•
Front wheel pin nut
•
Screw fixing wheel pin on right fork leg
FRONT BRAKE
•
Screws fixing front brake calliper to forks
•
Brake pipes / front brake calliper couplings
REAR SUSPENSION
•
Rear wheel pin nut
•
Screws tightening the fork pin cam
REAR BRAKE
•
Screws fixing parking brake calliper to supporting plate
•
Parking brake adjusting nut
•
Screws fixing rear brake calliper to supporting plate
•
Brake pipe / rear brake calliper coupling
FORK
•
Fork pin nut
•
Fork locking ring nut
STAND
Pre-delivery GP 800 i.e.
PRE DE - 2