Gilera GP 800 i.e. - Front Fork Refitting

- Check that hydraulic rod caulkings, the contrast
spring to the unloaded the end of stroke and the
hydraulic rod sealing ring are in good conditions.
- Check that the main spring exhibits no signs of
yielding or abnormal wear.
- Check that the closing cap O-ring of the stem is
in good conditions.
Refitting
- Preassemble the stem with the lower sliding
bushing, the hydraulic rod with the spring and the
stop bushing.
- Fit the pre-assembled components inside the fork
leg.
GP 800 i.e. Suspensions
SUSP - 13