Gilera GP 800 i.e. - Cleaning of the Components; Component Check

- Remove the hydraulic rod with the corresponding
sealing gasket, the spring and the stop bushing.
COMPONENT CHECK
CAUTION
CLEAN ALL THE COMPONENTS THOROUGHLY.
- Check that the fork leg exhibits no dents or dam-
age matching the couplings.
- Visually inspect that the upper sliding bushing
exhibits no signs of abnormal wear on the internal
surface.
- Check that the stem exhibits no scores, dents or
distortions.
- Check that the stop bushing for the hydraulic rod
is properly fixed through caulking.
- Visually inspect that the lower sliding bushing ex-
hibits no signs of abnormal wear on the external
surface.
Suspensions GP 800 i.e.
SUSP - 12