Gilera GP 800 i.e. - Fork Fitting

- Undo the two fixing screws and collect the wash-
ers to replace the stand stop buffer.
- Upon fitting, tighten the two screws to the pre-
scribed torque.
Locking torques (N*m)
Screw fixing centre stand stop buffer - fork 5 ÷
7
- Fit the pin and the stop bushing.
Fitting
N.B.
CLEAN ALL THE SURFACES AND THREADS THOROUGHLY BEFORE FITTING.
LUBRICATE ALL THE FRICTION AREAS THOROUGHLY.
- Fit the fork together with the rear shock absorber.
- Tighten the screw fixing it to the chassis to the
prescribed torque.
Locking torques (N*m)
Screw fixing shock absorber - fork 38 - 46
Suspensions GP 800 i.e.
SUSP - 34