Gilera GP 800 i.e. - Battery

Battery
- Undo the four screws indicated and remove the
battery compartment cover.
- Undo the screw and remove the battery fixing
bracket.
- Undo the battery negative and positive wires.
WARNING
IN ORDER TO AVOID DAMAGING THE ELEC-
TRICAL SYSTEM, NEVER DISCONNECT THE
WIRING WHILE THE ENGINE IS RUNNING.
- To remove the battery from its housing, remove
the shield back plate.
- Disconnect the cable harnesses at the back of
the battery compartment.
- Undo the three screws indicated.
GP 800 i.e. Chassis
CHAS - 23