Gilera GP 800 i.e. - Inspecting the Crankshaft Alignment; Inspecting the Crankshaft Components

- Hold the tip with one hand and the crankshaft with
the other, pull the crankshaft upwards.
- Remove the crankshaft once the tip has been re-
moved from the bushings.
- Once the crankshaft has been removed it is possible to remove the transmission-side timing chain.
Inspecting the crankshaft components
N.B.
TO MEASURE WEAR LIMITS AND COUPLING CLEARANCES, SEE THE SPECIFICATIONS CHAP-
TER.
See also
Crankcase - crankshaft - connecting rod
Inspecting the crankshaft alignment
N.B.
TO MEASURE WEAR LIMITS AND COUPLING CLEARANCES, SEE THE SPECIFICATIONS CHAP-
TER.
See also
Crankcase - crankshaft - connecting rod
GP 800 i.e. Engine
ENG - 75