Gilera GP 800 i.e. - Steering Column Overhaul

- Remove the half-handlebar supporting plate.
- Unscrew the steering ring nuts with the specific
tool.
Specific tooling
020668Y Steering ring nut wrench
- Remove the upper steering fifth wheel and rele-
vant components; the fork is now free.
CAUTION
HOLD IT SO THAT IT DOES NOT COME OFF
SUDDENLY.
- Slide off the complete front fork, remove the lower
steering fifth wheel.
Overhaul
- Clean thoroughly and visually inspect if the com-
ponents are in good conditions.
- Check the upper steering fifth wheel for wear.
Suspensions GP 800 i.e.
SUSP - 18