Gilera GP 800 i.e. - Fork Removal

- Following the operations indicated in the relevant
section, fit the rear fork on the vehicle thus fixing
the shock absorber to the chassis to the prescribed
torque.
Locking torques (N*m)
Screw fixing shock absorber - fork 38 - 46
Removal
See also
Exhaust assy. Removal
Refitting
See also
Exhaust assy. Removal
Fork
Removal
- Remove the left side fairing.
- Remove the rear wheel.
- Undo the two screws indicated and collect the
washers thus releasing the rear brake pipe retain-
er.
- Release the rear shock absorber front retainer.
- Undo the screw indicated and collect the washer.
N.B.
THE NOW FREE FORK ROTATES DOWN-
WARDS.
Suspensions GP 800 i.e.
SUSP - 28