Gilera GP 800 i.e. - Fuel Injector; Intake Air Temperature Sensor; Stepper Motor; Throttle Position Sensor

INTAKE AIR TEMPERATURE SENSOR
-10° = 9600 Ohm
0° = 5900 Ohm
+10° = 3800 Ohm
+20° = 2500 Ohm
-30° = 1700 Ohm
THROTTLE POSITION SENSOR
With the switch set to "ON" at a variable voltage
between 0.7V and > 4V between pins 23 - 3 on
engine-side wiring.
Ground insulation of pins 29 - 32 - 3 on engine-side
wiring
STEPPER MOTOR
Resistance engine-side connector between pins
19 - 9 ~ 51 Ohm
Resistance engine-side connector between pins
18 - 17 ~ 51 Ohm
FUEL INJECTOR
Type: 4 holes
Conicity of the nozzle: 24°
Resistance at terminals: 13.7 ÷ 15.2 Ohm
Characteristics GP 800 i.e.
CHAR - 10