Gilera GP 800 i.e. - Page 141

- Undo the screw fixing the catalytic converter to
the supporting bracket to the engine.
- The catalytic converter is now free.
- Release the attachment plate of the centre stand.
- Remove the catalytic converter.
- Remove rear exhaust manifold together with the
gasket and the graphite bushing.
- Unscrew the two retainers fixing the catalytic
converter support to the engine.
- Check the silent-block for wear; replace it if nec-
essary.
GP 800 i.e. Engine from vehicle
ENG VE - 7