Gilera GP 800 i.e. - Page 238

- Operating from the outside undo the chain ten-
sioner pad fixing screws.
- Remove the chain tensioner pad.
- With the specific tool, lock and undo the fixing
screw and collect the washer.
- Remove the oil pump control crown.
N.B.
IT IS ADVISABLE TO MARK THE CHAIN IN OR-
DER TO ENSURE THAT THE INITIAL DIREC-
TION OF ROTATION IS MAINTAINED.
Specific tooling
020565Y Flywheel lock calliper spanner
- Undo the two fixing screws and remove the oil
pump cover casing.
- Remove the pressure oil pump together with the
gasket.
Engine GP 800 i.e.
ENG - 88