Gilera GP 800 i.e. - Page 294

- Tighten the two screws indicated to the prescri-
bed torque.
Locking torques (N*m)
Screws fixing handlebar supporting plate -
steering tube 50 ÷ 55
- Fit both handlebar inserts inside the frame as in-
dicated in the photograph.
- Assemble the frame on the supporting plate .
- Fit the four fixing screws and tighten to the pre-
scribed torque.
Locking torques (N*m)
Screws fixing frame - supporting plate 4.5 ÷ 7
Suspensions GP 800 i.e.
SUSP - 8