Gilera GP 800 i.e. - Page 317

- Fit the adaptor handle from the left side, then
prepare the adaptor and the guide.
- Pull out the two ball bearing cages with the spe-
cific tool.
- Visually inspect if the surfaces are in good con-
ditions and that they exhibit no signs of scratches
or abnormal wear.
Specific tooling
020376Y Adaptor handle
020670Y Adaptor 34 mm
020483Y 30 mm guide
- Fit the adaptor handle from the right side, then
prepare the adaptor and the guide.
- Pull out the ball bearing cage with the specific
tool.
- Visually inspect if the surfaces are in good con-
ditions and that they exhibit no signs of scratches
or abnormal wear.
Specific tooling
020376Y Adaptor handle
020670Y Adaptor 34 mm
020483Y 30 mm guide
GP 800 i.e. Suspensions
SUSP - 31