Grandstream Networks UCM63 Series User Manual

P a g e | 104
UCM630X Series User Manual
Version 1.0.2.25
Once added, the option will be shown in the list below. On the left side of each option, users can click on
to remove this option from the model template. On the right side of each option, users can click on to
reset the option to the default value.
User could also click on “Add New Field” to add a P value number and the value to the configuration. The
following figure shows setting P value “P1362” to “en”, which means the display language on the LCD is set to
English. For P value information of different models, please refer to configuration template here
http://www.grandstream.com/support/tools.
Figure 62: Edit Model Template
 Click on Save when done. The model template will be displayed on Web GUIValue-added
FeaturesZero ConfigModel Templates page.
 Click on to delete the model template or click on “Delete Selected Templates” to delete multiple selected
templates at once.
 Click on “Toggle Selected Template(s)” to toggle the status between enabled/disabled for the selected model
templates.

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English