Grandstream Networks UCM63 Series User Manual

P a g e | 88
UCM630X Series User Manual
Version 1.0.2.25
Figure 55: Auto Provision Settings
Table 23: Auto Provision Settings
Enable Zero Config
Enable or disable the zero-config feature on the PBX. The default setting
is enabled.
Enable Automatic
Configuration Assignment
By default, this is disabled. If disabled, when SIP device boots up, the
UCM630X will not send the SIP device the URL to download the config file
and therefore the SIP device will not be automatically provisioned by the
UCM630X.
Note:
When disabled, SIP devices can still be provisioned by manually sending
NOTIFY from the UCM630X which will include the XML config file URL for
the SIP device to download.
Auto Assign Extension
If enabled, when the device is discovered, the PBX will automatically
assign an extension within the range defined in "Zero Config Extension
Segment" to the device. The default setting is disabled.
Zero Config Extension
Segment
Click on the link "Zero Config Extension Segment" to specify the extension
range to be assigned if "Automatically Assign Extension" is enabled. The

Grandstream Networks UCM63 Series Specifications

General

Brand	Grandstream Networks
Model	UCM63 Series
Category	PBX
Language	English